Momentum Press is Proud to bring to you Chemical Sensors: Simulation and Modeling Volume 4: Opti cal Sensors,edited by Ghenadii Koroteenkov. This is the fourth of a new multi-volume comprehensive reference work that provides computer simulation and modeling techniques in various fields
of chemical sensing and the important applications for chemical sensing such as bulk and surfacc diffusion, adsorption, surface reactions, sintering, conductivity, mass transport, and interphasc interactions.
關於作者:
Ghenadii Korotcenkov, received his Ph.D. in Physics and Technology of Semiconductor Materials and Devices in 1976, and his Habilitate Degree Dr.Sci. in Physics and Mathematics of Semiconductors and Dielectrics in 1990. For a long time he was a leader of the scientific Gas Sensor Group and manager of various national and international scientific and engineering projects carried out in the Laboratory of Micro- and Optoelectronics, Technical University of Moldova. Currently, Dr. Korotcenkov is a research professor at the Gwangju Institute of Science and Technology, Republic of Korea.
Specialists from the former Soviet Union know Dr. Korotcenkov''s research results in the field of study of Schottky barriers, MOS structures, native oxides, and photoreceivers based on Group IIIH-V compounds very well. His current research interests include materials science and surface science, focused on nanostructured metal oxides and solid-state gas sensor design. Dr. Korotcenkov is the author or editor of 11 books and special issues, 11 invited review papers, 17 book chapters, and more than 190 peer-reviewed articles. He holds 18 patents, and he has presented more than 200 reports at national and international conferences.
Dr. Korotcenkov''s research activities have been honored by an Award of the Supreme Council of Science and Advanced Technology of the Republic of Moldova 2004, The Prize of the Presidents of the Ukrainian, Belarus, and Moldovan Academies of Sciences 2003, Senior Research Excellence Awards from the Technical University of Moldova 2001, 2003, 2005, a fellowship from the International Research Exchange Board 1998, and the National Youth Prize of the Republic of Moldova 1980, among others.
目錄:
PREFACE
ABOUT THE EDITOR
CONTRIBUTORS
7 NOVEL LONG-PERIOD FIBER GRATING SENSOR BASED ON DUAL-PEAK RESONANCE AND SPR
1 Introduction
2 Dual Peak Resonance in Coated LPFG
2.1 Coupled Theoretical Analysis of Coated LPFG
2.2 Determination of Dual Resonance Wavelengths
2.3 Transmission Characteristics of Dual Resonance LPFG
3 Model Analysis Of SPR-Based LPFG with Metal Coating
3.1 Establishing the Complex Characteristic Equation
3.2 Equation Solution Method
3.3 Intensity Profile of Cladding Mode
4 Optimization of Coated LPFG Sensor Based on DPR and SPR
4.1 Definition of Sensor Sensitivity
4.2 Optimization of Design of LPFG Sensors
5 Dispersion in Metal-Coated LPFG Sensors
5.1 Dispersion Expression
5.2 Material Dispersion Influence on Resonance Characteristics
5.3 Jump Region in Response of Resonance Wavelength
5.4 Optimization Based on Consideration of Dispersion
6 Conclusion
Acknowledgments
References
8 ANALYTICAL APPROACHES TO OPTIMIZATION OF GAS DETECTION USING FABRY-PEROT INTERFEROMETERS
1 Introduction
1.1 Gas Sensor Design
2 The Narrow-Gap FPI Gas Sensor
2.1 Sensor Response and the Cross-Correlation Spectroscopy Principle
2.2 Optimal FPI Mirror Refiectivity
2.3 Multiple Gas Sensors Based on the Narrow-Gap Design
2.4 Narrow-Gap Sensor Design with a Narrow Band-Pass Filter
2.5 Narrow-Gap Sensor Design and MEMS
3 The Wide-Gap FPI Gas Sensor
3.1 The Convolution Method
4 Internal Reflection Effects
5 Conclusions
References
9 SPECTROSCOPIC MODELING OF MID-INFRARED CHEMICAL SENSORS
1 Introduction
2 Example #1: Accessing the "Active" Sensing Regions of an ATR Element via Ray Tracing
3 Example #2: Sensor Response Simulation-Toward Virtual
Calibrations
3.1 Experimental Spectra Acquisition
3.2 Dielectric Function Modeling
3.3 Model Establishment and Validation
3.4 Sensor Response Simulation
3.5 Spectrum Prediction
4 Example #3: Extended Applications
4.1 Exploration of the Sources of Deviations in Beer''s Law Plots
4.2 Optical Tolerance Study I: Assessing the In-Coupling Ratio-Sharpness of the Focal Point
10 FINITE-ELEMENT MODELING OF INFRARED SENSORS
11 DESIGN AND OPTIMIZATION OF OPTICAL GAS SENSOR SYSTEMS
12 SIMULATION AND MODELING FOR OPTICAL DESIGN OF LASER REMOTE SENSING FOR GAS MEASUREMENTS