1 绪论Introduction
1.1 测控仪表系统Measurement and Control Itrument System
1.2 本课程的意义及所讨论的内容Significance and Content of the Coue
关键词Key Words and Phrases
习题Problems
2 测控仪表基本概念及性能指标Basic Concept and Performance Index of Measurement
and Control Itrumentl
2.1 测量范围、上下限及量程Measuring Range.Upper and Lower Range
Limit,Span
2.2 零点迁移和量程迁移Zero Shift and Span Shift
2.3 灵敏度和分辨率Seitivity and Resolution
2.4 测量误差Measurement Error
2.5 线性度Linearity
2.6 精度和精度等级Accuracy and Accuracy Grade
2.7 死区、滞环和回差Dead Band、Hysteresis error、Hysteresis of
Itrument
2.8 反应时间Respoe Time
2.9 重复性和再现性Repeatability and Reproducibility
2.10 可靠性Reliability
2.11 稳定性Stability
关键词Key Words and Phrases
习题Problems
3 温度检测及仪表Temperature Measurement and Itruments
3.1 温度及温度测量Temperature and Temperature Measurement
3.2 接触式测温仪表Itruments of Contact Temperature Measurement
3.3 非接触式测温仪表Itruments of Non-contact Temperature
Measurement
3.4 光纤温度传感器Optical-fiber Temperature Seo
3.5 测温仪表的选用及安装Selection and Itallation of Temperature Measuring
Itruments
关键词Key Words and Phrases
习题Problems
4 压力检测及仪表Pressure Measurement and Itruments
4.1 压力及压力检测方法Pressure and Pressure Measurement Methods
4.2 常用压力检测仪表Pressure Measurement Itruments in General Use
4.3 测压仪表的使用及压力检测系统Use of Pressure Itrument and Pressure
Measurement System
关键词Key Words and Phrases
习题Problems
5 流量检测及仪表Flow Measurement and Itruments
5.1 流量检测的基本概念Basic Concept of Flow Measurement
5.2 体积流量检测及仪表Volumetric Flow Measurement and Itruments
5.3 质量流量检测及仪表Mass Flow Measurement and Itruments
5.4 流量标准装置Calibration Devices for How Measurement
5.5 流量测量仪表的选型Selection of Flow Measurement Itruments
关键词Key Words and Phrases
习题Problems
6 物位检测及仪表Level Measurement and Itruments
6.1 物位的定义及物位检测仪表的分类Definition and Classification of Level
Measurement Itruments------
6.2 常用物位检测仪表Level Measurement Itruments in General Use
6.3 影响物位测量的因素Influence Facto of Level Measurement
6.4 物位测量仪表的选型Type Selection of Level Measurement Itruments
关键词Key Words and Phrases
习题Problems
7 成分分析仪表Analytical Itruments
7.1 成分分析方法及分类Composition Analytical Methods and
Classification
7.2 自动分析仪表的基本组成Basic Composition of Automatic Analyze
7.3 工业常用自动分析仪表Industrial Automatic Analyze in General Use
关键词Key Words and Phrases
习题Problems
8 控制仪表及装置Control Itruments and Devices
8.1 概述Introduction
8.2 模拟式控制仪表Analog Control Itruments
8.3 数字式控制仪表及装置Digital Control Itruments and Devices
关键词Key Words and Phrases
习题Problems
9 执行器Actuator
9.1 概述Introduction
9.2 执行机构Actuator
9.3 调节机构Valve
9.4 执行器的选择和计算Selection and Calculation of Actuator
9.5 气动执行器的安装和维护Itallation and Maintenance of Pneumatic
Actuator
9.6 电气转换器及阀门定位器Electric Pneumatic Converter and Valve
Positioner
9.7 数字调节阀与智能调节阀Digital Valve and Intelligent Valve
关键词Key Words and Phrases
习题Problems
参考文献Reference