Forewords
Introduction
1.1 General of the project
1.2 Layout of weirs
1.3 Layout of piers
1.4 Design of tainter gate support
1.5 Arrangement of prestressed tendons
Basic parameters and design priciples
2.1 Basic parameters
2.1.1 Characteristic water levels
2.1.2 Water surface profile on the pier
2.1.3 Unit weight of water
2.1.4 Properties of rock foundation
2.1.5 Properties of concrete
2.1.6 Properties of tendons
2.1.7 The thrust of tainter gate
2.1.8 Tonnage of the prestressed tendons
2.1.9 Earthquake parameters
2.1.10 Temperature load
2.1.11 Thrust of the bulkhead gate
2.2 Limit states of concrete
2.3 Loads and load combinations
2.3.1 On the middle pier
2.3.2 On the side pier
Numerical model of the pier
3.1 Assumptions
3.2 Region of finite element analysis
3.3 Boundary conditions
3.4 Model of the pier
3.4.1 Coordinate system
3.1.2 The FEM model
3.5 Analysis procedures
4 Results of the middle pier
4.1 Definitions
4.1.1 Coordinate systems
4.1.2 Stress
4.1.3 Displacement and deformation
4.1.4 Characteristic sections
4.1.5 Key points
4.1.6 The paths
4.1.7 Terminology
4.2 Results of the stresses
4.2.1 Anchorage block
4.2.2 Bearing area of the pier
4.2.3 The upstream vertical anchorage well
4.2.4 The intersecting line of pier body with base plate
4.2.5 The slot of the tainter gate
4.2.6 Bulkhead slot
4.2.7 The galleries
4.3 Results of the displacements
4.3.1 Anchorage block
4.3.2 Bearing area of the pier
4.3.3 The upstream vertical anchorage well
4.3.4 The intersecting line of pier with base plate
4.3.5 The tainter gate slot
4.3.6 The bulkhead slot
4.3.7 The galleries
4.3.8 Contour map of the displacements
5 Results of the side pier
5.1 Definitions
5.1.1 Coordinate systems
5.1.2 Stress
5.1.3 Displacement
5.1.4 Characteristic sections
5.1.5 Key points
5.1.6 The path
5.1.7 Terminology
5.2 The results of stresses
5.2.1 Anchorage block
5.2.2 Bearing area of the pier
5.2.3 The upstream vertical anchorage well
5.2.4 The intersecting line of pier with base plate
5.2.5 The slot of the tainter gate
5.2.6 Bulkhead slot
5.3 Results of the displacements
5.3.1 Anchorage block
5.3.2 Bearing area of the side pier
5.3.3 The upstream vertical anchorage well
5.3.4 The intersecting line of side pier with base plate
5.3.5 The tainter gate slot
5.3.6 The bulkhead slot
5.3.7 Contour maps of the displacements
Conclusions
6.1 The middle pier
6.1.1 The stresses of main parts
6.1.2 The displacements of main parts
6.2 The side pier
6.2.1 The stresses of main parts
6.2.2 The displacements of main parts
6.3 Suggestions
Appendix-A Anchor-plans comparison of vertical anchorage well with anchorage cavities.
Appendix-B Stress of the anchorage region of prestressed tendons
Appendix-C Stress band plot in the unfavorable load cases
Appendix-D Constant value line figures of stresses
References
購物車/收銀台(0) | 在線留言板
| 付款方式
| 聯絡我們
| 運費計算
| 幫助中心 |
加入書簽
HOME
新書上架
